Space Elevators: Tether Materials

Artyukhov, V., Liu, Y. and Yakobson, B., “Getting the Most Out of Nanotubes: Guidance from Fracture Physics and Atomistic Simulations”, CLIMB, Vol. II, 2013.

Barber, A.H. et al. (2005), “Stochastic strength of nanotubes: An appraisal of available data”, Compos. Sci. Technol., Vol 65 No 15-16, pp. 2380–2384.

Barnds, J., et al. (1998). TiPS: Results of a Tethered Satellite System. Tether technology Interchange Meeting, NASA/CP-1998-206900, NASA Marshall. January 1998.

Belytschko, T. et al (2002), “Atomistic simulations of nanotube fracture”, Phys. Rev. B, Vol 65 no 23, 235430.

Brambilla, G. & Payne, D.N. (2009) “The ultimate strength of glass silica nanowires”, Nano Lett., Vol 9 No 2, pp. 831-835. [Abstract]

Brambilla, G., “An Updated Review of Nanotechnologies for the Space Elevator Tether”, CLIMB, Vol. I, 2011.

Carroll, J.A., “SEDS Deployer Design and Flight performance”, AIAA Space Programs and Technologies Conference and Exhibit, Huntsville, AIAA-93-4764, September 1993. [First page]

Carroll, J.A. and Oldson, J.C., “SEDS characteristics and capabilities”, in Proceedings of the 4th International Conference on Tethers in Space, pp. 1079-1090, 1995.

Chobotov, V.A. and Mains, D.L., “Tether Satellite System Collision Study”, Acta Astronautica, Vol 44, Nos. 7 – 12, pp 543 – 551, 1999. [Abstract]

Cornwell, C.F. et al., “Very-high-strength (60-GPa) carbon nanotube fiber design based on molecular dynamics simulations”, J. Chem. Phys., Vol. 134, 204708, 2011. [Abstract]

Cosmo, M.L. and Lorenzini, C.E., “Tethers In Space Handbook”, prepared for NASA Marshall Space Flight Center by Smithsonian Astrophysics Observatory, Cambridge, MA, December 1977.

Coste, Darren, “Tether Material and Deployment Mechanism for Tethered Satellite Constellations”, IAC-18, paper and presentation, Bremen, Oct 2018.

Cronin, S.B. et al., “Resonant Raman spectroscopy of individual metallic and semiconducting single-wall carbon nanotubes under uniaxial strain”, Phys. Rev. B, Vol 72 No 3, 035425, 2005.

Demczyk, B.G. et al., “Direct mechanical measurement of the tensile strength and elastic modulus of multi-walled carbon nanotubes”, Materials Science and Engineering, vol A334, pp. 173–178, 2002.

Dobrowolny, M. and Stone, N.H., “A Technical Overview of TSS-1: The First Tethered Satellite System Mission”, Il Nuovo Cimento, Vol. 17C, N.1, pp. 1-12, 1994.

Ebbesen, T.W. and Ajayan, P.M., “Large-scale synthesis of carbon nanotubes” Nature, Vol. 358, pp. 220-222, 1992.

Filleter, T. & Espinosa, H.D., “Multi-scale mechanical improvement produced in carbon nanotube fibers by irradiation cross-linking”, Carbon, in press (2013).

Gao, P., et al., “Self-Built Tensile Strain in Large Single-Walled Carbon Nanotubes”, ACS Nano, Vol 4 No 2, pp. 992-998, 2010.

Gassend, B., “Non-Equatorial Uniform-Stress Space Elevator,” 3rd Annual International Space Elevator Conference, Washington DC, 20 June 2004.

Gassend, B., “Exponential tethers for accelerated space elevator deployment”, in Proc. of 3rd International Space Elevator Conference, June 2004.

Haase, Mark, “Advances in High Tensile Strength Materials for Space Elevator Applications”, Journal of British Interplanetary Society, Vol 69, No 06/07, Dec 2016.

Haase, Mark, “Status of Space Elevator Tether Material Research,” presentation at the National Space Society Conference, St. L0uis, May 2017.

Haase, Mark, “Status of Space Elevator Tether Material Research,”  presented during the Space Elevator Track at the 2017 National Space Society’s International Space Development Conference, St. Louis, August 2017.

Hata, K. et al., “Water-Assisted Highly Efficient Synthesis of Impurity-Free Single-Walled Carbon Nanotubes” Science, Vol. 306 no 5700, pp. 1362-1364, 2004.

Huang, S., et al., “Growth Mechanism of Oriented Long Single Walled Carbon Nanotubes Using “Fast-Heating” Chemical Vapor Deposition Process”, Nano Lett., Vol 4 No 6, pp. 1025-1028, 2004.

Hong, B. et al., “Quasi-Continuous Growth of Ultralong Carbon Nanotube Arrays”, J. Am. Chem. Soc., Vol. 127 No 44, pp. 15336-15337, 2005.

Iijima, S., “Helical microtubules of graphitic carbon” Nature, Vol. 354, pp. 56-58, 1991.

Ishikawa, Yoji, “Survivabilitiy of Carbon Nanotubes in Space”, IAC-18, paper and presentation, Bremen, Oct 2018.

Yoji Ishikawa, “Exposure of Coated CNT Yarns to Space,” IAC-21, 72nd International Astronautical Congress, Dubai, UAE, October 2021

Iwanaga, H. and Kawai, C., “Tensile Strength of Silicon Nitride Whiskers Synthesized by Reacting Amorphous Silicon Nitride and Titanium Dioxide”, J. Am. Ceram. Soc., Vol 81 No 3, pp. 773-776, 2005.

Kong, J. et al., “Synthesis of individual single-walled carbon nanotubes on patterned silicon wafers” Nature, Vol. 395, pp. 878-881, 1998.

Koziol, K. et al., “High-Performance Carbon Nanotube Fiber”, Science, Vol 318 No 5858, pp. 1892-1895, 2007.

Kruijff, M. and van der Heide, E. J., “Qualification and In-flight Demonstration of a European Tether Deployment System on YES2”, in Acta Astronautica, Vol. 64, p.882-905, 2009.

Kruijff M., van der Heide, E.J. and Ockels W.J., “Data Analysis of a Tethered SpaceMail Experiment”, in Journal of Spacecraft and Rockets”, Vol. 46, No. 6, pp. 1272-1287, 2009 (presented as AIAA-2008-7385).

Laubscher, Bryan, “Carbon Nanotube Industry Review,” presented at 2017 ISEC Conference, Seattle, 25-27 Aug 2017.

Li, W.Z. et al., “Large-Scale Synthesis of Aligned Carbon Nanotubes”, Science, Vol. 274 no 5293, pp. 1701-1703, 1996.

Li, Y-L et al., “Direct Spinning of Carbon Nanotube Fibers from Chemical Vapor Deposition Synthesis”, Science, Vol 304 no 5668, pp 276-278, 2004.

Lin, W. et al., “Microwave Makes Carbon Nanotubes Less Defective”, ACS Nano, Vol 4 No 3, pp. 1716-1722, 2010.

Liu, K. et al., “Carbon nanotube yarns with high tensile strength made by a twisting and shrinking method”, Nanotech., Vol 21 No 4, 045708, 2010.

Ma, W.J. et al., “Directly Synthesized Strong, Highly Conducting, Transparent Single-Walled Carbon Nanotube Films”, Nano Lett., Vol 7 No 8, pp. 2307-2311, 2007.

Ma, W.J. et al., “Monitoring a Micromechanical Process in Macroscale Carbon Nanotube Films and Fibers”, Adv. Mat., Vol 21 No 5, 603-608, 2009.

Nixon, Adrian, Keynote Presentation: “The last piece of the puzzle? - Single Crystal Graphene”, International Space Elevator Conference, paper and presentation, Seattle, Aug 2018.

Nixon, Adrian, “Update on Graphene as a Tether Material”, presented at 2019 International Space Elevator Conference, Seattle, 16-18 Aug 2019. 

Nixon, Adrin, "Graphene: the Last Piece of the Space Elevator Puzzle," ISEC Webinar www.isec.org, May 29, 2020.

Nixon, Adrian, “The graphene and graphite landscape: Indications of unexplored territory,” Nixene Journal, 5, (10), pp. 9-19 (1 Oct. 2021).

Nixon, Adrian, “Space Elevator tether materials: An Overview of the Current Candidates,” 20th IAA Symposium on Visions and Strategies for the Future, IAC-2022, Paris France.

O’Brien, N.P. et al., “A theoretical quantification of the possible improvement in the mechanical properties of carbon nanotube bundles by carbon ion irradiation”, Carbon, Vol. 53, pp. 346-356, 2012.

Pan, Z. W. et al., “Very long carbon nanotubes”. Nature, Vol. 394 pp 631-632, 1998.

Peng, B. et al., “Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements”, Nat. Nanotechol., Vol. 3 No 10, pp. 626-631, 2008.

Pugno, N.M. & Ruoff, R.S., “Quantized fracture mechanics”, Philosophical Mag., Vol 84 No 27, pp. 2829-2845, 2004.

Pugno, N. et al., “Size effects on the strength of nanotube bundles”, Meas. Sci. Technol., Vol 20 No 8, 084028, 2009.

Pugno, N. M., “Towards the Artsutanov's dream of the space elevator: The ultimate design of a 35 GPa strong tether thanks to graphene”, Acta Astronautica, Volume 82, Issue 2, p. 221-224, 2013.

Pugno, N., “The Effect of Collapsed Nanotubes on Nanotube Bundle Strength”, CLIMB, Vol. II, 2013.

Pugno, N. and Abdalrahman, T., “Modeling the Self‐healing of Biological or Bio‐inspired Nanomaterials, CLIMB, Vol. I, 2011.

Renteln, Peter, “A Scalable Carbon Nanotube Cable Strengthening Method”, presented at 2019 International Space Elevator Conference, Seattle, 16-18 Aug 2019.

Roundy, D. and Cohen, M.L., “Ideal strength of diamond, Si, and Ge”, Phys. Rev. B, vol. 64, 212103, 2001.

Ruoff, R.S, Qian, D. and Liu, W.K., “Mechanical properties of carbon nanotubes: theoretical predictions and experimental measurements”, Comptes Rendus Physique, Vol 4 No 9, pp. 993-1008, 2003.

Sasaki, S. et al., “Results from a Series of Tethered Rocket Experiments”, AIAA, USA, 1987.

Sasaki, S. and Oyama, K.I., “Space Tether Experiments in Japan”, 2nd International Workshop on the Application of Tethered Systems in Space, Kanagawa, Japan, ISAS, May 1994.

Sharma Gaurav and Andrew Meulenberg, “Collosal Carbon Tubes as Tethers for a Space Elevator,” Conf. Proceedings, International Space Elevator Consortium, Seattle, Washington, USA, 23 Aug. 2012.

Stano, K.L. et al., “Direct spinning of carbon nanotube fibres from liquid feedstock”, Int. J. Mat. Forming, Vol 1 No 2, pp. 59-62, 2008.

Suemori, K., “Film-shaped thermoelectric conversion elements can be produced in print”, 2012, available at: http://www.aist.go.jp/aist_j/aistinfo/aist_today/vol12_04/p17.html

Swan, Peter, David Raitt, John Knapman, Akira Tsuchida, Michael Fitzgerald and Yoji Ishikawa, “Road to the Space Elevator Era”, Virginia Edition Publishing Company, Science Deck, 2019, ISBN-19: 978-0-9913370-3-3.

Tang, G. et al. “New Confinement Method for the Formation of Highly Aligned and Densely Packed Single-Walled Carbon Nanotube Monolayers”, Small, Vol 6 No 14, pp. 1488-1491, 2010.

Telling, R. H., Pickard, C. J., Payne, M. C. and Field, J. E., “Theoretical Strength and Cleavage of Diamond”, Phys. Rev. Lett., Vol. 84, pp. 5160–5163, 2000.

Termonia, Y. et al., “Theoretical Study of the Influence of the Molecular Weight on the Maximum Tensile Strength of Polymer Fibers”, Macromol., Vol. 18, pp. 2246-2252, 1985.

Tsukiyama, Y., “Tribological properties of high-alignment carbon nanotube films”, The Machine Design and Tribology Division meeting in JSME 2010 (10), 49-50, 2010-04-18, 2010.

Tyc, G. and Han, R.P.S., “Attitude Dynamics Investigation of the OEDIPUS: A Tethered Rocket Payload”, Journal of Spacecraft and Rockets, Vol. 32, No. 1, p. 133‐141, February 1995.

Umehara, N. (2007), “Tribology of Fullerane and Carbon NanoTube as Advanced Materials Designed Nano-structures”, Shinku, Vol. 50 No. 2, pp. 76-81, 2007.

Vigneron, F.R., Jablonski, A.M. et al., “Comparison of Analytical Modeling of OEDIPUS Tethers with Data from Tether Laboratory”, Journal of Guidance, Control and Dynamics, Vol. 20, No. 3, pp.471-478, May-June 1997.

Wang, X. et al., “Fabrication of Ultralong and Electrically Uniform Single-Walled Carbon Nanotubes on Clean Substrates” Nano Lett. Vol. 9 no 9, pp. 3137-3141, 2009.

Wang, Z., Ciselli, P. and Peijs, T., “The extraordinary reinforcing efficiency of single-walled carbon nanotubes in oriented poly(vinyl alcohol) tapes”, IOP Nanotechnology, Vol 18 No 45, 455709, 2007.

Wei, X. et al., “Tensile Tests on Individual Multi-Walled Boron Nitride Nanotubes”, Adv. Mater., Vol 22 No 43, pp. 4895-4899, 2010.

Wen, Q. et al., “Growing 20 cm Long DWNTs/TWNTs at a Rapid Growth Rate of 80−90 μm/s”, Chem. Mater., Vol 22 No 4, pp. 1294-1296, 2010.

Wen, Q. et al., “100-mm Long, Semiconducting Triple-Walled Carbon Nanotubes”, Adv. Mater., Vol 22 No 16, pp. 1867-1871, 2010.

Williams, P., Blanksby, C. and Trivailo, P., “Tethered Planetary Capture Maneuvers,” Journal of Spacecraft and Rockets, Vol. 41, No. 4, pp.603-613, 2004.

Williams, P., “Dynamics and Control of Spinning Tethers for Rendezvous in Elliptic Orbits,” Journal of Vibration and Control, Vol. 12, No. 7, pp.737-771, 2006.

Wong, S.S. et al., “Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes”, Science, Vol 277 No 5334, pp 1971-1975, 1997.

Xie, H. et al., “Growth of high-density parallel arrays of ultralong carbon nanotubes with catalysts pinned by silica nanospheres”, Carbon, Vol. 52, pp. 535-540.

Yakobson, B.I. and Avouris, P., “Mechanical properties of carbon nanotubes” Carbon Nanotubes, Vol 80, pp. 287–327, 2001.

Yamada, T. et al., “Revealing the Secret of Water-Assisted Carbon Nanotube Synthesis by Microscopic Observation of the Interaction of Water on the Catalysts”, Nano Lett., Vol 8 No 12, pp. 4288-4292, 2008.

Yao, Y. et al., “Raman Spectral Measuring of the Growth Rate of Individual Single-Walled Carbon Nanotubes”, J. Phys. Chem. C, Vol 111 No 24, pp. 8407-8409, 2007.

Yu, M.-F. et al., “Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load”, Science, Vol 287 No 5453, pp. 637-640, 2000.

Yuan, Q. et al., “Threshold Barrier of Carbon Nanotube Growth”, Phys. Rev. Lett., Vol. 107, 156101, 2011.

Yuan, Q. et al., “Efficient Defect Healing in Catalytic Carbon Nanotube Growth”, Phys. Rev. Lett., Vol. 108, 245505, 2012.

Zedd, M.F., “Experiments in Tether Dynamics Planned for ATEx’s Flight”, Tether Technology Interchange Meeting, NASA/CP-1998-206900, NASA Marshall, January 1998.

Zhang, M. et al., “Multifunctional Carbon Nanotube Yarns by Downsizing an Ancient Technology”, Science, Vol 306 No 5700, pp 1358-1361, 2004.

Zhang, X. et al., “Ultrastrong, Stiff, and Lightweight Carbon-Nanotube Fibers”, Adv. Mater., Vol 19, pp. 4198-4201, 2007.

Zhang, X. & Li, Q., “Enhancement of Friction between Carbon Nanotubes: An Efficient Strategy to Strengthen Fibers”, ACS Nano, Vol 4 No 1, pp. 312-316, 2010.

Zhang, R. et al., “Superstrong Ultralong Carbon Nanotubes for Mechanical Energy Storage”, Adv. Mater., Vol 23 No 30, pp. 3387-3391, 2011.

Zhao, Q. et al., “Ultimate strength of carbon nanotubes: A theoretical study”, Phys. Rev. B, Vol 65 No 14, 144105, 2002.

Zheng, L.X. et al., “Ultralong single-wall carbon nanotubes”, Nature Mat., Vol 3 No 10, pp. 673-676, 2004.

Zheng, L. et al., “Tuning Array Morphology for High-Strength Carbon-Nanotube Fibers”, Small Vol 6 No 1, pp. 132-137, 2009.